The correct way to get the perfect manicure

 

We start by preparing the station, where only sterilised tools should be present. Remember to wear gloves and disinfect your hands!

STEP 1

Remove cuticles - this is best done with a milling machine and the picks that suit you best (you can find videos of different picks here). If you don't have a cutter, remove cuticles (dry) with a cutter pick and, if necessary, cut the cuticles with a pair of tweezers.


STEP 2

Matt the nails with a high-grade file (180 or 240) or polishing block, paying particular attention to the area around the nail shafts.


STEP 3

Clean the nail plate of dust using a brush. Apply Nail Prep, taking care not to touch the nail plate so as not to contaminate it again.


STEP 4

In this step, we apply Acid Primer or No Acid Primer or Ultra Bond Extra Strong (recommended to increase polish adhesion).


STEP 5

After the Primer has evaporated (approx. 15s.), apply Smart Base Crystal Clear, curing in the lamp (UV - 2 min. or LED - up to 30s.)


STEP 6

Then apply the first layer of gel polish, cure in the lamp (UV - 2 min. or LED -30 to 60 sec.).


STEP 7

For a better effect and depth of colour, apply a second coat of gel polish, cure in the lamp (UV - 2 mins or LED -30 to 60 secs).

STEP 8

Apply Top Coat or Ultra Top Matt, depending on the effect you want to achieve. Speed up your work by applying Top Thicky No Sticky without a dispersion layer.
If you want to give your nails an original finish use our GALAXY Top No Wipe, which will transform any nail design.


STEP 9

Wipe off the dispersion layer with a dust-free sponge soaked in Cleaner.


STEP 10

Apply oil to nourish cuticles and shine the finish with a cotton swab.

 

Gel Polish removal

Remove your gel polish with our excellent  drill bit for gel polish!